> Measuring Devices>Measuring Probes

Measuring Probes

Measuring Probes

Measuring Probes

Showing 1 - 13 of 13 items
  • £ 189.00

    * Entry Level

    * 12mm Ø shank

    * 134mm in length (excluding shank)

    * Dial face 39mm Ø

    * Slim, compact design

    * 3mm Ø carbide tipped stylus

    * Can approach from X, Y & Z axis

    * Not suitable for use with coolant

    £ 189.00
  • £ 219.00

    * 12mm Ø shank

    * 124mm in length (excluding shank)

    * Dial face 39mm Ø

    * Slim, compact design

    * 3mm Ø carbide tipped stylus

    * Can approach from X, Y & Z axis

    * Water resistant

    £ 219.00
  • £ 249.00

    * 12mm Ø shank

    * 150mm in length (excluding shank)

    * Dial face 54.8mm Ø

    * Slim, compact design

    * Large dial face

    * 3mm Ø carbide tipped stylus

    * Can approach from X, Y & Z axis

    * Water resistant

    £ 249.00
  • £ 299.00

    * 20mm Ø shank

    * 135mm in length (excluding shank)

    * Dial face 39mm Ø

    * Slim, compact design

    * 3.6mm Ø conical probe stylus

    * 3.2mm Ø carbide tipped stylus

    * Can approach from X, Y & Z axis

    * Designed for lathes

    * Water resistant

    £ 299.00
  • £ 29.00

    *Ball Diameter 3mm

    *Overall Length 27mm

    £ 29.00
  • £ 43.00

    *Ball Diameter 6mm

    *Overall Length 62mm

    £ 43.00
  • £ 91.00
    New

    * Tip Diameter 3.6mm

    * Overall Length 34mm

    * Suitable for DREHPlus

    £ 91.00

  • *Standard Touch Probe with Wide Range Infrared Transmission

    *HTL Signal Levels via SE Transceiver Unit

    *Repeatability to ≤ 1µm

    *Accuracy ≤ ± 5µm for a Standard T404 Stylus

    *Infrared Transmission with 360° Range

  • *Precise Tool Length and Diameter Measurements

    *Suitable for Setting Tool Lengths in Z

    *Setting Rotating Tools in X and Y for radius offsets

    *Tool Breakage Detection

    *Tool Presetting prior to machining

    *Disc and Square Styli available

    *Can be fixed to a T slot or onto a pillar

  • *Pre Aligned Laser

    *Offered in lengths between 150mm and 1000mm

    *Compact and rugged design

    *Hybrid laser to reach absolute accuracy limits

    *Low air consumption

  • *Multi Directional Probe 

    *Repeatability to 0.3µm

    *Maximum Speed 3m/min

    *Self Centring Stylus

    *Accurate probing even under heavy coolant pollution

  • *Improved transmission protocol

    *Compact design without compromising performance

    *Simplified installation, ideal for retrofitting 

    *Long battery life for minimal downtime

    *Simple and safe programming

    *Shock and Vibration resistant

  • *Automatic in cycle measurement of actual tool length and tool radius

    *Suitable for measurement of the tool whilst in spindle

    *Tool breakage detection

    *In case of accidental collision the TT140 is equipped with a breakage system

Showing 1 - 13 of 13 items